Hydro-Jetting & Rooter Service in the Las Vegas Valley

Hydro-jetting sends high-pressure water through a drain or sewer line using a nozzle that scours grease, soap, scale and debris off the pipe wall. Rooter service uses a mechanical cable with cutting heads to break up roots and tough clogs. Many lines need both - the cutter opens the blockage and the jetter cleans the bore back to its full size. A camera inspection before or after shows the line's condition and confirms it is clear.

Las Vegas Valley water is very hard - about 280 parts per million, roughly 16 grains per gallon, according to SNWA - and those minerals leave scale on the inside of drain lines over the years. Add kitchen grease, soap and the roots that find small cracks and loose joints in older clay and cast iron sewer pipe, and a line can narrow for years before it finally backs up. A snake opens a path through that buildup, but the scale, grease and root fibers left on the wall catch the next clog. That is the pattern hydro-jetting is built to break.

Active Plumbing starts by finding the access point, usually the cleanout, and on older or problem lines runs a camera first. High-pressure water can make an existing crack or collapse worse, so we look before we jet a line we have not seen. Where roots are heavy, a rooter cutting head opens the line first, then the jetter scours the pipe back toward full bore. A second camera pass confirms the result. If the camera shows a broken or sagging section, we explain the repair options and give a written price before any further work. For routine slow drains, Drain Cleaning may be all you need, and Water Softener Installation can reduce the scale that builds up in your plumbing.

We have served the valley since 1991 as a fourth-generation family business, licensed under #0047021. Call (702) 438-3357 to schedule hydro-jetting, or for a sewage backup at any hour, reach our Emergency Plumbing team.

Grease and soap buildup in kitchen and main lines, hard water scale narrowing the pipe bore, tree roots entering cracks and loose joints in older clay and cast iron sewer pipe, and debris that keeps catching on what a snake left behind. Lines can also sag out of grade where poorly compacted backfill settled or expansive clay moved, creating low spots where waste collects.

Hydro-jetting for residential lines typically runs $300 to $600 in the Las Vegas Valley. That is a typical valley range, not a quote. Your price depends on line length, access, the type and amount of buildup, and whether a camera inspection or root cutting is needed. We can give a general idea of pricing on the phone, and you get a written price on site before work starts. Many residential jobs are finished in one visit, and financing is available.

We match jetting pressure and nozzle to the pipe material and its condition, whether that is cast iron, clay, ABS or PVC. Rooter equipment with cutting heads handles root masses and hard blockages. On older lines, or any line with a history of problems, we run a camera first to check for cracks, offsets or collapse before applying high pressure. A camera pass afterward confirms the line is clear and shows any section that needs repair. Pipe material is always confirmed on site rather than assumed from the home's age.

If a line keeps clogging or several drains are backing up, stop running water into it and call Active Plumbing at (702) 438-3357. We are open 24/7, arrive in 30 to 60 minutes anywhere in the valley, and give a written price before work starts.