A lift station collects sewage from fixtures or buildings that sit lower than the sewer line and pumps it up to the gravity line. Cleaning is more than pumping out the basin. Grease, wipes, rags and settled solids accumulate in the wet well, coat the walls and wrap around floats and impellers. When a float hangs up on debris, the pump never gets the signal to run, or it keeps running dry and burns out. Wipes wrapped around an impeller stall the pump altogether.
Active Plumbing pumps and cleans the basin so the floats move freely, then inspects the basin, lid and inlet. We test the floats, pump amperage, the check valve and the alarm circuit, because a worn check valve lets the discharge line drain back and makes the pump short-cycle. On commercial duplex stations we confirm both pumps alternate and that each can carry the load alone. The system is run through several fill and pump cycles, and every station is left with a working high-water alarm.
Regular cleaning matters because a lift station fails all at once, often as sewage backing up into the building. How often a system needs service depends on how heavily it is used, so we suggest an interval based on what we find in the tank. Holding tank pumping typically runs $150 to $350 and lift station repairs $200 to $800+ in the Las Vegas Valley, with a written price before work starts. Call (702) 438-3357.