Skip to main content
4.9/550,000+ Happy ClientsFinancing available

Pipe & Fixture Services in Enterprise, NV

Repipes, fixtures, remodels and new construction plumbing from a licensed family business serving the valley since 1991 Plumbing for Enterprise homes from Silverado Ranch to the newest southwest tracts, 24/7

Active Plumbing has provided pipe & fixture services to Enterprise and the rest of the Las Vegas Valley since 1991. License #0047021. Fully insured.

Licensed and Insured24/7 AvailabilityWritten Price Before Work Starts35+ Years ExperienceRepair-First Honesty
Technicians arrive in 30-60 minutesWritten price before work starts

Get Your Quote

Open 24/7. Written price before work starts.

BBB

BBB A+ Rated

Accredited Business with an A+ rating from the Better Business Bureau.

Licensed & Insured

Nevada plumbing contractor - Lic #0047021 - with full liability coverage.

Since 1991

35+ years serving the Las Vegas Valley - family-owned and operated.

24/7 Emergency Service

Nights, weekends, and holidays - real emergency response across the Valley.

Service Area

Reliable Pipe & Fixture Services in Enterprise

Active Plumbing serves Enterprise, from Silverado Ranch to Mountain's Edge and Southern Highlands, with 24/7 plumbing, 30 to 60 minute arrival and a written price before work starts.

Enterprise is an unincorporated Clark County town covering much of the southwest valley, bounded by Sunset Road on the north, Bermuda Road on the east and St. Rose Parkway on the southeast, with Spring Valley to the north, Paradise to the east and Henderson to the southeast. Active Plumbing covers its ZIP codes, including 89123, 89139 and 89183, with technicians arriving in 30 to 60 minutes, 24 hours a day. The housing runs from Silverado Ranch, built from the mid-1990s, through Southern Highlands, Coronado Ranch and Mountain's Edge to Southwest Enterprise, still under construction in places. With roughly 36 percent of homes rented, many calls come through landlords and property managers, and the written price is given before work starts so the person paying can approve it.

Pipe & Fixture Services in Enterprise: What Changes Here

Pipe and fixture services in Enterprise cover whole-house repiping, fixture installation and repair, remodel plumbing, new construction and ADU work, and backflow testing. What makes this work different in Enterprise is the housing stock itself: most of it is builder-grade construction from the late 1990s through the 2010s, so the failures here are not old galvanized pipe but original angle stops that seize, pressure regulators that have drifted, and first-generation fixtures clogged with scale from water running at about 280 parts per million. Permits run through Clark County, not a city department, which affects how permitted remodel and new construction jobs are sequenced.

Kitec fittings shape repipe planning in Silverado Ranch

Silverado Ranch was built from the mid-1990s through the early 2000s, placing it squarely inside the Kitec window of about 1995 to 2007. A whole-house repipe here starts with identifying whether Kitec fittings are present at the water heater, under sinks or in the walls, because Kitec changes the scope and the material choices. Confirming what is behind the walls on site is the first step before any repipe price is written.

Backflow permits run through Clark County

Enterprise is unincorporated Clark County, so backflow assembly testing, repair and installation paperwork goes to the Clark County building department rather than any city counter. For irrigation systems in Southern Highlands or commercial properties in Coronado Ranch, the water provider's backflow program also applies. Confirming jurisdiction by parcel before scheduling a test or a new installation avoids delays, especially for multifamily and investor-owned properties where the caller and the permit applicant are often different people.

Hard water scale drives fixture repair calls here

At roughly 280 parts per million, valley water deposits calcium scale in aerators, cartridges, fill valves and mixing valve passages. In Enterprise's newer homes, builder-grade faucets and shower valves reach the end of their service life faster than the pipe does. A fixture repair call here often involves clearing scale from the valve seat or replacing a cartridge that has seized, and supply lines and angle stops are checked at the same visit because they are original to the build.

ADU plumbing in Southwest Enterprise needs early utility coordination

Southwest Enterprise is still under active construction in places, and ADU projects here involve tying a new dwelling into an existing water service, sewer lateral and sometimes a gas line. Whether the existing service can carry the added load has to be answered before rough-in begins. Clark County issues the permits, and sequencing the underground phase around the slab pour is the same coordination challenge as any new construction job in the valley.

Get Your Quote

Tell us what's going on and we'll get back to you. We're open 24/7.

Local Knowledge

Common Pipe & Fixture Issues in Enterprise

Seizing angle stops delay fixture repairs

In Enterprise's builder-grade homes, original angle stops under sinks and behind toilets have often never been turned since installation. Scale from water at roughly 280 parts per million cements the packing, and when a fixture needs repair the stop will not close. A fixture replacement that should take one visit turns into a stop replacement as well, which adds time and parts to the job.

Remodel rough-in waits on Clark County inspection

Because Enterprise is unincorporated Clark County, remodel plumbing rough-in must pass a county inspection before walls close. The inspection schedule is set by the county building department, not the contractor or the general contractor. Tile and cabinet work cannot start until rough-in is signed off, so a delayed inspection slot can stall the entire remodel. Confirming the permit and scheduling early keeps the sequence intact.

New construction ADU utility capacity is not guaranteed

Adding an ADU or casita in Southwest Enterprise requires tying into an existing water service and sewer lateral. Whether those lines have capacity for a second dwelling has to be confirmed before underground work begins. If the existing service is undersized, the scope and cost of the underground phase grow before a single fixture is set. This question is best answered at the planning stage, not after the slab is poured.

Rental properties complicate repair authorization

With roughly 36 percent of Enterprise homes renter-occupied, the person reporting a fixture leak or a running toilet is often not the person who authorizes or pays for the repair. In Coronado Ranch especially, where investor ownership is common, a written price must go to the owner or property manager before work starts. Coordinating that approval adds a step that can delay an otherwise straightforward fixture or repipe job.

Caliche slows underground work for new construction

Caliche, the cemented calcium-carbonate hardpan common across the valley, makes trenching for underground supply and sewer lines slower and more expensive than in softer ground. For new construction and ADU plumbing in Enterprise, the underground phase budget should account for caliche. Poorly compacted backfill in caliche-bearing soil can also settle under a pipe over time, pulling it out of grade, so bedding and compaction matter at every underground stage.

Local Tips

Pipe & Fixture Tips for Enterprise Residents

Before scheduling a remodel, confirm your parcel is in unincorporated Clark County. Enterprise addresses carry a Las Vegas mailing address but permits go through the Clark County building department, and the inspection sequence for rough-in is set by the county.

If your Enterprise home was built between 1995 and 2007, ask a plumber to identify the fitting material at the water heater and under sinks before planning a repipe. Kitec fittings change the scope and material choices, and confirming what is there on site is the right first step.

Have your irrigation backflow preventer tested each year before the watering season starts. The Las Vegas Valley Water District requires annual certification, and a cracked body from a winter night means the assembly must be repaired and retested before you can run the system.

If you are adding an ADU in Southwest Enterprise, ask about water service and sewer lateral capacity before rough-in begins. Finding that the existing service is undersized after the slab is poured adds scope and cost to the underground phase.

When a faucet or shower valve is repaired, ask the plumber to check the original angle stops at the same visit. In Enterprise's builder-grade homes, stops that have never been exercised often seize from mineral scale and will not close when you need them to.

Coverage

Areas We Serve in Enterprise

Silverado Ranch

Built out from the mid-1990s through the early 2000s along Silverado Ranch Boulevard, the oldest housing in Enterprise and inside the Kitec window of about 1995 to 2007.

Southern Highlands

Master-planned from the late 1990s around its private golf club below the Spring Mountains, with production tracts, semi-custom homes and guard-gated custom estates.

Coronado Ranch

Production tract housing from the late 1990s through the 2000s around Rainbow and Blue Diamond, with a significant rental and investor-owned share.

Mountain's Edge

Started in February 2004 under Focus Property Group and planned for 14,500 homes across more than 22 neighborhoods, anchored by Mountains Edge Regional Park.

Southwest Enterprise

The newest area, built from the 2010s onward and still under construction in places, with PEX supply, ABS or PVC drainage and slab-on-grade homes.

Why Trust Us

Licensed and Insured Pipe & Fixture Services in Enterprise

✓

Licensed since 1991

Nevada State Contractors Board license #0047021, verifiable at nvcontractorsboard.com.

✓

Fourth-generation family business

Family owned and serving the Las Vegas Valley since 1991, with some owners US military veterans.

✓

30 to 60 minute arrival

Open 24/7, with technicians reaching Enterprise and the rest of the valley in 30 to 60 minutes.

✓

Written price before work starts

You see the price in writing on site before any work begins. Insured, with warranties on parts and labor.

Pipe & Fixture Jobs We Handle in Enterprise

A 1980s home with gray polybutylene supply lines has had two fitting leaks in a year and the owner is done with spot repairs.

An older home near downtown has galvanized lines delivering rusty water and weak pressure at every tap.

A home inspection before a sale flagged Kitec at the water heater and the buyer wants it addressed.

Kitchen faucet dripping and crusted with scale - the cartridge is replaced, or a new faucet is installed with new supply lines if the body is worn.

Toilet running all night - the flapper and fill valve are replaced and the shutoff valve is swapped if it no longer closes.

Shower that swings between hot and cold - the mixing valve cartridge is cleaned of scale or replaced so it holds temperature again.

Pipe & Fixture Services service in Enterprise

Ready to Get Started?

Trusted plumber in Enterprise since 1991. Call now or book online. Technicians arrive in 30 to 60 minutes.

Our Pipe & Fixture Process in Enterprise

Identify the pipe

We confirm the supply material, check pressure and leak history, and map how lines can be routed through the house.

Written price and permit

You get a written price covering PEX or copper and wall openings, and we file the permit with the building department for your address.

Replace the supply lines

New lines run from the main shutoff to each fixture, with water restored at the end of each working day where possible.

Test and inspect

The new system is pressure tested and inspected before walls close, then fixtures are reconnected and checked.

Worried about the cost?

Customer financing available. Ask us about options.

What Customers Say About Our Pipe & Fixture Services in Enterprise

Real reviews from Enterprise and nearby Enterprise neighborhoods.

The hall bath faucet leaked at the base and stained the vanity. Cartridge, supply stops, and a new escutcheon, not a full remodel. We were in Rancho Bel Air, Las Vegas. The wood dried and we kept the stone top we liked.

Daria H.

Rancho Bel Air, Las Vegas

Google review, September 2026

A roof vent was missing its screen and pigeons nested in the stack. They pulled the nest, camera-verified the run, and capped the vent. We were in Elkhorn, North Las Vegas. The bath fan no longer smells like a coop.

Quinn B.

Elkhorn, North Las Vegas

Google review, August 2026

A slab cleanout was buried under a paver patio with no marker. They located it, set a traffic-rated lid, and mapped it. We were in Mountain Trails, Summerlin. The next clog will not require a treasure hunt.

Ike X.

Mountain Trails, Summerlin

Google review, August 2026

Pipe & Fixture Services in Enterprise - Frequently Asked Questions

A whole-house repipe typically runs $4,000 to $15,000 in the Las Vegas Valley. That is a typical range, not a quote. Home size, fixture count, stories, routing and PEX versus copper all affect it, and Active Plumbing gives you a written price on site before work starts.

Yes. The permit goes through the building department for your address: the City of Enterprise, Henderson, North Las Vegas, Boulder City, or Clark County for unincorporated areas like Paradise, Spring Valley and Enterprise. An unpermitted repipe can cause trouble when you sell, and permitted work must be done by a licensed contractor.

Plumbing contractors are licensed by the Nevada State Contractors Board, and any license is verifiable at nvcontractorsboard.com. Active Plumbing holds license #0047021, has served the valley since 1991, and has a 4.9 Google rating with more than 880 reviews. Ask for the number and check it before you hire.

It depends on the pipe, not just the leak count. Polybutylene and corroded galvanized tend to fail throughout the house, so spot repairs keep coming. A single pinhole in otherwise sound copper is usually a repair. We identify the material and show you what we find.

Build era is a guide. Pre-1960s homes in the historic core often have galvanized steel, many 1970s to early 1990s homes have polybutylene, some late 1990s and 2000s homes have Kitec, copper spans the middle decades, and newer homes mostly have PEX. We always confirm on site.

Both are approved under the local plumbing code. PEX is flexible, needs fewer fittings and usually fewer wall openings, and costs less in labor. Copper is rigid and long proven, and some owners prefer it. We can price both so you can compare.

Most homes take a few days depending on size, layout and access. Water is off for part of each working day, and we restore it at the end of the day wherever the layout allows. Ask any contractor whether wall patching is included so quotes compare fairly.

Valley water is about 280 parts per million, roughly 16 grains per gallon, which is very hard. Scale builds in valves, fixtures and water heaters regardless of pipe material, so a softener or scale-reduction system is worth considering alongside a repipe.

Yes. The Las Vegas Valley Water District's backflow prevention program requires annual testing of assemblies on irrigation systems. Under the 2024 Southern Nevada Amendments, a certified tester must test the assembly at installation, repair, relocation and at least annually after that, leaving certification on site. A failed test from a cracked body or damaged test cock means the assembly must be repaired and retested before the watering season resumes.

Homes in that build window typically have copper or PEX supply lines and PVC or ABS drains. The supply pipe itself is usually not the problem; the issues are builder-grade fixtures, angle stops that have never been exercised and pressure regulators that have not been adjusted since handover. We confirm what is in the walls on site before recommending any repipe or repair scope.

Fixture installation typically runs $150 to $400 in the Las Vegas Valley. A whole-house repipe typically runs $4,000 to $15,000, depending on home size, number of bathrooms, one or two stories, attic or slab routing, and PEX versus copper. These are typical valley ranges, not quotes. We give a general idea on the phone and a written price on site before work starts.

We are open 24 hours a day, seven days a week, and technicians arrive in 30 to 60 minutes anywhere in the Las Vegas Valley, including Enterprise. Trucks carry common repair parts for fixtures, supply lines, angle stops and valves, so many fixture and pipe repairs finish in a single visit without a return trip for parts.

Need Pipe & Fixture Services in Enterprise? We're Open 24/7.

Active Plumbing is licensed in NV and serves all of Enterprise. Call to schedule service or book online.

OUR SERVICE AREA

Proudly Serving All of Las Vegas Valley

Address:3580 Polaris Ave #17, Las Vegas, Nevada 89103Phone:(702) 438-3357Hours:Open 24/7Email:service@activeplumbinginc.com

Active Plumbing is Las Vegas-based and open 24/7 for residential and commercial plumbing across Las Vegas Valley. We handle Emergency Plumbing, Drain & Sewer Services, Water Heater Services, Water Treatment, Gas Line Services, Pipe & Fixture Services and Sewage & Waste Services, with warranties on parts and labor.

Our licensed technicians serve Enterprise, Henderson, Las Vegas, North Las Vegas, Paradise, Spring Valley, Summerlin, Sunrise Manor, Whitney, Winchester, and the surrounding neighborhoods.

Let's Start a Conversation

Book Your Service Call Now

Contact us:

(702) 438-3357

service@activeplumbinginc.com

3580 Polaris Ave #17, Las Vegas, Nevada 89103

Hours: Open 24/7